Pneumatic

Tecno easy

Tecno easy · PRE-U3

In Stock

Tecno easy is a piezo-piloted, three-way proportional pressure regulator with electronic closed-loop control. The standard PS120200-080 uses a 0-8 V setpoint for a 0-8 bar output and a 24 V DC supply, providing compact pneumatic pressure control.

Contact Now Return to Products

Features

0-8 V setpoint for a 0-8 bar output
Nominal flow 200 L/min; maximum flow 350 L/min
Low power: maximum nominal power 0.4 W
M8 3-pin connector; optional G1/8 base plate

General specifications

Series / order codePRE-U3 / PS120200-080-0xx

Output pressure0-8 bar

Supply pressure1.5-10 bar

Setpoint input0-8 V (1 V/bar)

Power supply24 V DC ±10%

Maximum nominal power / current0.4 W / 15 mA

Nominal flow QN200 L/min

Maximum flow Qmax350 L/min

Repeatability / hysteresis<0.2% p2max

Linearity (+20 °C)<2.5% p2max

Electrical connectorM8, 3-pin

Base plate ports / boreG1/8 / 2.5 mm

ProtectionIP30

Ambient / medium temperature0…+50 °C

Storage temperature-20…+60 °C

Mass (valve / with base plate)0.100 / 0.155 kg

Conditions and selection notes

Repeatability, hysteresis and linearity are relative to the maximum output pressure p2max of the selected variant. Linearity is specified at +20 °C.
The 0–8 bar version has a maximum flow of 350 L/min at p1 = 10 bar, p2 = 6.3 bar and Δp = 1 bar. Actual flow depends on supply pressure, output pressure and load. Distinguish nominal flow from maximum flow when selecting the valve.
Supply pressure must be at least 1 bar above the highest required output pressure and within the limits of the selected variant. Use clean compressed air meeting the model requirements and keep exhaust ports unobstructed.
M8 pins: 1=24 V, 3=GND, 4=setpoint voltage. This model has no actual pressure output.